Videos where consoles are screwed apart, booms on YouTube - and the new Switch OLED is of course not sure before this trend. The Hardware Professional Taylor Dixon from iFixit has disassembled Nintendos new model and compared with that of 2019. Among other things, we can marvel at the thin screen. We reveal you more about the video.
Model comparison
It s about it: The revised and improved model of Nintendos Success Console, the Switch OLED, has been commercially available for a short time. One of the hardware and repair professionals from IFIXIT has taken them apart in a video and compared with the standard model from 2019. There are some changes, whereby most, as in the video explains do not make a big difference for performance or gameplay . Here you can watch the video:
Recommended editorial content
At this point you will find an external content of YouTube, which complements the article. You can view it with a click and hide it again.
Allow YouTube content
I agree that ITube content will be displayed.
Personal data can be transmitted to third-platforms. Read more about our privacy policy.
Link to YouTube content
The new screen: The most exciting, of course, when removing the new screen, which is described in the article on the iFixit website as painfully thin and fragile . In the old model, only a bit of heat is needed before the rest can be done with a small standard tool. In front of the Switch Oly, Taylor Dixon has significantly more respect from ifixit.
He puts the console on a heat pad and uses a suction cup, which then works surprisingly well. The pro is pleased because the new model offers much more breakage. At the original switch, the display was behind relatively stable plastic, while the OLED model is glass.
More about the Switch OLED:
Nintendo Switch vs. OLED VS. LITE: All differences in comparison Switch OLED already has display protective film and Nintendo warns you remove it Nintendo recommends three games that look especially great on the Switch OLED
More differences
In addition, further changes in the new model of the switch are also highlighted: inside the console, the hardware preach discovers other cooling hardware and a new board.
At first glance, it is also surprising that fans and heat sinks are significantly smaller than the old model - though the thinner display actually would have to be there. However, there is still the joint of the new and larger builders who has to do somewhere.
Furthermore, in the OLED model, in contrast to the old switch, a closed speaker system is installed. Open speakers, which emit not only into one, but in different directions, were loud the developer in the new design of the OLED too quietly, as Dixon explains.
Add to this the following differences:
Akcelerometer of TDK-Invensense instead of Stmicroelectronics LPDDR4 memory from Micron instead of Samsung Nand Flash from Samsung instead of Toshiba Samsung S2DOS04-Power Management Chip
What do you think of the new components?
Comments
Post a Comment